Skip to the content

MiniCutter - Small & compact CLC block cutting machine

Made in Vietnam by THT International Co., Ltd, this mini lightweight concrete cutting machine uses steel cutting wires to cut the foam concrete cakes cast into blocks of different sizes.

It helps the small producers who usually use battery molds to eliminate the blocks partition wall plates inserted into the molds and greatly increase efficiency.

By using this small cutting machine, the production capacity will become higher, the quality of blocks will be greatly improved and the production cost will be much-reduced thanks to the savings on labor and material costs.

MiniCutter - CLC block cutting machine

MiniCutter - CLC block cutting machine

Technical specifications

Electric power 

0.25kW/380V/50Hz

Capacity

from 5 to 7m3/shift (with electric gear motor)

Mobility

The machine has 4 wheels for manual travel along the mould lines, with manual brakes for stabilizing the machine during the cutting action

Operating modes

Can be operated in 2 modes: electrically driven mode by a small electric motor and manual mode in case of a power outage. The manual mode will allow a continuous production process, to avoid the need of a electric generator

Cutting Wires

With 6 cutting wires tensioned by bolts, moving back and forth along 2 high-quality chrome plated shafts with 4 special linear bearings which gives a very easy and smooth movement of the cutting frame

Cutting frame

Cutting frame can move downward freely on 2 vertical stainless steel shafts guided by 2 bushings to create the pressing force of cutting wires on the CLC cakes. The rise of cutting frame after each cutting action is made manually by a rotating handle. 

Cutting speed

One cutting action takes around 10-20 seconds maximum. The machine can start cutting in 3-4 hrs after pouring.

Block size

Can cut a long cake of 500/600(W) x 200(H) x 2400(L)mm into 24 blocks of 100x200x500/600mm. Other blocks size possible by changing the distance between the cutting wires. Cake can be longer than 2400mm if the length of the molded panel is longer.

Weight

65kgs

Mould size

600(R) x 1000 (D) x 850mm (C)

MiniCutter - World's smallest CLC block cutting machine

Mobile machine with 4 wheels for manual travel along the mould lines, with manual brakes for stabilizing the machine during the cutting action.

With 6 cutting wires tensioned by bolts, oscillating back and forwards along 2 high quality chrome plated shafts with 4 special linear bearings which gives a very easy and smooth movement of the cutting frame. Cutting frame can move downward freely on 2 vertical stainless steel shafts guided by 2 bushings to create the pressing force of cutting wires on the CLC cakes.

This machine can cut a long cake of 500/600(W) x 200(H) x 2400(L)mm into 24 blocks of 100x200x500/600mm in 10-15min.

 

Small CLC block production plant with MiniCutter

Our MiniCutter cutting machine is designed to be part of a mini CLC block manufacturing plant.

A mini CLC blocks production line of 10-15m3 per day can be designed as per the below illustration with one mixer with capacity of 0.5m3, a pouring cart, several molds and one or 2 MiniCutter machines. This type of plant is very suitable for the rural area or developing countries where electricity may not be stable and labor is plentiful and cheap.

The production process:

  • Lightweight concrete is mixed in a mixer (containing air compressor, foam generator and control cabinet). Then, it is poured into mold 2400 x 500x 200mm.
  • After about 3 hours, use MiniCutter to cut a long concrete cake into blocks of 100x200x500 mm.
  • Bricks are cured by spraying water outside the storing area. After 3 weeks, it can be supplied to the construction site.
Mini CLC block production line

Mini CLC block production line

Have a question? Need a quotation?

Please leave us a message if you have any questions or need a quotation, and we will get back to you very soon.

The 'First name' field is required
The 'Last name' field is required
Please enter a valid Email address

Cellular Lightweight Concrete Technology

We are one of the leading manufacturers of CLC foam concrete equipments, and have exported to many countries around the world. We can supply machines as part of a production line, or complete turn-key manufacturing plants.

THT International

No. 11, 259/9 Vong Street
Hanoi, Vietnam

Tel: +84 243 8697855
Email: director@thtvietnam.com

 

Have a question?

Let us know if you have any queries or questions, we will be more than happy to help!